S6061-32A Non Fail-Safe Damper Actuators Damper Actuator Price

• Customization: Available
• Power: 24V/230V
• Transport Package: Cartons
• Specification: 1.2kg
• Trademark: SOLOON
• Origin: China
• Production Capacity: 100000

Product Description

Features of S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators)

 

• Torque 32NM

• 0(4)…20mA   0(2)…10V

• Maximum round shaft φ20 and square shaft 16*16mm.

• Direction of rotation can be set.

• Manual Override

• With 2 auxiliary switches are optional

• Power supply AC/DC 24V or AC 230V

• Modulating

   

Technical datasheet of S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators)

 

Item	Unit	S6061-32AN(F)
Torque	Nm	32Nm
Damper area	m^2	6m^2
Running time	sec	114~138
Power supply	V	24VAC/DC
Frequency	Hz	50/60 7.5W 50/60Hz
Running consumption	W	2.5W
Maintaining consumption	W	0.3W
Weight	Kg	1.25Kg
Control signal		0(4)…20mA 0(2)…10V
Rotation angle		0~90º(Max 93°)
Limited angle		5~85º(Per step 5º)
Auxiliary switch rating		3(1.5)Amp 250V
Life cycle		>70000 cycles
Noise level		45dB(A)
Electrical level
Protection level		IP44 or IP54
Ambient Temperature		-20~+50ºC
Ambient Humidity		5~95%RH
Storage temperature		-40~+70ºC
Certificate		CE UL

Remark: After lead to the actuator wire through PG joint, the protection level can reach IP54.

 

 

 

 

Wiring diagram of S6061-32A Standard Damper Actuator (Non Fail-Safe Damper Actuators)

 

Auxiliary switch of S6061-32A Standard Damper Actuator (Non Fail-Safe Damper Actuators)

There are two auxiliary switches of S6061-32AF damper actuator, can set the angle 0-90° (factory sets 10° and 80°), it will show a signal when the actuator turns to the setting angle.

Angle of rotation limiting of S6061-32A Standard Damper Actuator (Non Fail-Safe Damper Actuators)

The rotation angle or working range of the actuator can be adjusted 5°by adapter so that can limit mechanically. You just press the locking clip to lose the adapter.

Control signal and choose the rotate direction of S6061-32A Standard Damper Actuator (Non Fail-Safe Damper Actuators)

Factory setting:

Switch an at 10° Switch b at 80° The switching position can be manually changed to any required position by turning the ratchet.

Must make the contact pin(C) in as Same direction as motor plug.

 

Outline dimension of S6061-04A Standard Damper Actuator (Non Fail-Safe Damper Actuators)